EVS XT3 Version 11.02 - July 2013 Configuration Manual - Manual (Page 93)

Example: 3D/1080p Dual Link 1SLSM 2x + 1REC+ 1PLAY
The BNC connectors to be used as record and play channels in a 3D or 1080p Dual Link
configuration 1SLSM 2PH + 1REC + 1 PLAY need to be cabled as shown below:
Note
In an equivalent configuration with a 3G interface, only the J8 connectors are
cabled. However the primary and secondary links on the codec module of the
V3X board are both used.
Available SLSM 3x Configurations
The tables below show the available 3D and 1080p configurations with SLSM 3 Phase
cameras on a XT3 4U server. They show the link assignment at the level of the codec
module of a V3X board.
IN4/OUT1 IN3/OUT2 IN2/OUT3 IN1/OUT4
#REC
SLSM
3x
#REC #PLAY
Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link
1 0 0 REC
1,3A REC
1,3B REC
1,2A REC
1,2B REC
1,1A REC
1,1B
1 1 0 REC
2A REC
2B REC
1,3A REC
1,3B REC
1,2A REC
1,2B REC
1,1A REC
1,1B
1 0 1 PLAY
1A PLAY
1B REC
1,3A REC
1,3B REC
1,2A REC
1,2B REC
1,1A REC
1,1B
CONFIGURATION MANUAL XT3 Server 11.02
3. Multicam Configuration 85