EVS XT3 Version 11.02 - July 2013 Configuration Manual - Manual (Page 85)

Example: 1xSLSM 3PH + 2REC + 1PLAY MIX
The BNC connectors to be used as record and play channels in an SLSM configuration
with 1xSLSM 3PH + 2REC + 1PLAY MIX need to be cabled as shown below:
Example: 1xSLSM 3PH + 3 REC + 2 PLAY MIX (XREC)
The BNC connectors to be used as record and play channels in an SLSM configuration
with 1xSLSM 3PH + 3 REC + 2 PLAY MIX in XREC mode need to be cabled as shown
below:
Available U-Motion 6-Phase Configurations
The table below shows the available U-Motion 6 and 10 Phase configurations in HD with
an XT3 6U server, and how the BNC connectors should be cabled:
IN6/OUT1 IN5/OUT2 IN4/OUT3 IN3/OUT4 IN2/OUT5 IN1/OUT6
#REC
SLSM
6x
#REC #PLAY
Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link
1 0 1 PLAY
1 REC
1,5 REC
1,4 REC
1,3 REC
1,2 REC
1,1 REC
1,6
1 1 2 PLAY
1 PLAY
1 REC
1,4 REC
1,3 REC
1,2 REC
1,6 REC
1,1 REC
1,5
CONFIGURATION MANUAL XT3 Server 11.02
3. Multicam Configuration 77