3 assigning a channel to a recorder panel, 1 introduction, Assigning a channel to a recorder panel – EVS IPDirector Version 5.9 - January 2011 Part 4 User’s Manual User Manual
Page 15: Introduction
Issue 5.9.B
IPDirector Version 5.9 – User Manual – Part 4: Ingest
EVS Broadcast Equipment – January 2011
4
1.3 ASSIGNING A CHANNEL TO A
RECORDER PANEL
1.3.1 I
NTRODUCTION
There are several methods to assign a recorder channel to the Recorder Panel.
Some of the methods will directly open an instance of the Recorder Panel. Others
are used when the Recorder Panel is already open.
•
Open the Recorder Panel and assign a channel from the Channel Explorer.
•
Open the Recorder Panel and assign a channel from the main menu of
IPDirector.
•
Open the Recorder Panel and assign a channel from the Channel field in the
Recorder Panel.
•
Assign a channel from the ShuttlePRO device.
1.3.2 H
OW TO
O
PEN THE
R
ECORDER
P
ANEL AND
A
SSIGN A
C
HANNEL
F
ROM THE
C
HANNEL
E
XPLORER
To open the Recorder Panel and assign a channel to it from the Channel Explorer,
proceed in one of the following ways:
•
In the Channel Explorer, double-click on the corresponding recorder channel
name.
•
Right-click on the mouse and select Open Recorder Panel from the contextual
menu.
1.3.3 H
OW TO
O
PEN THE
R
ECORDER
P
ANEL
F
ROM THE
M
AIN
M
ENU AND
A
SSIGN A
C
HANNEL
To open the Recorder Panel from the main menu and assign a channel to it,
proceed as follows:
1.
Select
from the main menu of IPDirector.
A Recorder Panel window opens in an inactive state as a recorder channel