EVS IPDirector Version 5.9 - January 2011 Part 4 User’s Manual - Manual (Page 68)

IPDirector Version 5.9 – User Manual – Part 4: Ingest
EVS Broadcast Equipment – January 2011
Issue 5.9.B
57
Use the buttons and to go respectively to the Mark IN or Mark OUT
frames.
R
ECORDER
B
AR
The Recorder bar shows the linked recording channel on the EVS video server.
The device can be changed by right-clicking the blue bar and selecting a device
from the list that appears or by dragging a recorder channel from the Channel
Explorer. This selection is required to be able to initiate the Single Clip Digitize
or Bach Digitize modes.
Note
A default recorder can be defined in the VTR Engine configuration. If a
default recorder channel is associated, it is automatically assigned when
selecting a VTR channel.
C
LIP
I
NFORMATION
F
IELDS
Field / Button Instructions
Tape ID Allows to enter a Tape ID, according to the label on the tape
in the VTR.
Clip Name Used to enter a name for the clip here.