Vtr control panel, 1 introduction, 1 purpose – EVS IPDirector Version 5.9 - January 2011 Part 4 User’s Manual User Manual
Page 61: 2 overview of the display modes, How to export an ingest list, Urpose, Verview of the, Isplay, Odes
Issue 5.9.B
IPDirector Version 5.9 – User Manual – Part 4: Ingest
EVS Broadcast Equipment – January 2011
50
3. VTR Control Panel
3.1 INTRODUCTION
3.1.1 P
URPOSE
The purpose of the VTR Control Panel is to control a VTR (Video Tape Recorder)
from IPDirector. It is an advanced remote control, from within the IPDirector
application.
Apart from playback and record control, it also allows the extraction of clips from
a tape to the EVS video servers. This process can be done for a single clip or
multiple clips can be “batch digitized”.
3.1.2 O
VERVIEW OF THE
D
ISPLAY
M
ODES
The VTR Control Panel has 3 display modes:
•
transport mode
•
single clip digitize mode
•
batch list mode
The display modes are controlled by the buttons in the top right corner of the
initial VTR Control Panel window.
Button status
Display mode
Transport mode
Single clip digitize mode
Batch list mode
To select a display mode: click the corresponding block (top left / top right /
bottom).