Channel contextual menu, Secondary control mode – EVS IPDirector Version 5.6 - May 2009 Part 6 User's Manual User Manual

Page 15

Advertising
background image

Issue 5.6.D

IPDirector Version 5.6 – User Manual – Part 6: Playout – Playlist Panel

EVS Broadcast Equipment – May 2009

6

To deactivate the on-air function, right-click the Channel Name field and uncheck
On Air from the menu.

This only provides a visual warning that the current playlist is On Air.

This can be selected manually on the Playlist Panel or can be set using a GPI. For

more information on setting this parameter using a GPI, see the section ‘Settings
– Input GPIs’ in part 1 of the user manual.

Channel Contextual Menu

Right-clicking the Channel Name field displays the channel contextual menu.

This menu makes it possible to perform the following actions:

Option Description

2ND Controler

Allows toggling the control between the Playlist Panel
and the secondary control device. Refer to section
below for more information.

Mode

Gives access to a sub-menu allowing operations in 1

PGM mode or in PGM/PRV mode.

On Air

Activates the on air display.

Set Channel to IDLE

Unloads the playlist from the player channel.

None

Allows the user to work on a playlist without
associating a player channel to it.

Workstation Channel

Corresponds to the linked channel assigned to the
local IPDirector workstation.
Assigned in the Channel Management area of the
Remote Installer.

“List of the available
channels”

Gives the list of all the player channels available on
the XNet network, and visible to the current user

Secondary Control mode

Exclusive control of any channel by a third party protocol (switcher, editor
controller or 3

r d

party device) can be achieved using the 2

n d

Controller feature of a

Playlist Panel. This feature allows switching the control between IPDirector and
the other device, when the port and protocol settings have been assigned to work
in Exclusive mode.
The 2

n d

Controller option is only available if the channel has been configured with

the IPDP protocol as the main controller in exclusive mode.

When the configuration has been set to parallel mode the control of the channel is
from either IPDirector or the 3

r d

Party device simultaneously and the second

control feature is inactive.

Advertising