5 adding a linked clip to a playlist, Introduction, How to insert a linked clip – EVS IPDirector Version 5.6 - May 2009 Part 6 User's Manual User Manual
Page 60: 5 ‘adding a linked clip to a playlist, Dding a, Inked, Lip to a, Laylist
IPDirector Version 5.6 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – May 2009
Issue 5.6.D
51
1.5.5 A
DDING A
L
INKED
C
LIP TO A
P
LAYLIST
I
NTRODUCTION
A linked clip is a clip that was created at the same time as the clip already present
in the playlist but taken from a different record train. For example when recording
a show with a main transmission cut and several isolated camera angles, if clips
are created simultaneously on all angles, these would be given a linked clip status
by IPDirector.
Several actions on linked clips are possible from the Playlist Panel:
•
Insert a linked clip,
•
Replace by a linked clip,
H
OW TO
I
NSERT A
L
INKED
C
LIP
To insert a linked clip from the Playlist Panel, proceed as follows:
1.
Select a clip in the playlist for which you want to insert linked clips.
2.
Right-click the element.
The Playlist Element contextual menu is displayed.
3.
Select Insert a linked clip from the contextual menu.
A sub menu is displayed including all clips linked to the selected clip.
4.
Select the linked clip to insert from the list.
A popup window is displayed:
5.
Do one of the following:
•
To insert the linked clip before the selected element in the list, select the
Insert Before button.
•
To insert the linked clip after the selected element in the list, selection
the Insert After button.
•
To abort the operation, select the Cancel button.
The linked clip is inserted at the requested position.