EVS IPDirector Version 5.6 - May 2009 Part 6 User's Manual - Manual (Page 39)

Issue 5.6.D IPDirector Version 5.6 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – May 2009
30
If another playlist had previously been loaded, this latter is replaced by the new
one on the Playlist Panel.
How to Cue up a Playlist to the Player Channel
Whena playlist is loaded on a channel associated to a Playlist Panel, loading an
element type (clip, train, growing clip) on the same channel will unload the playlist
from the channel. However, it is still possible to load it again on the associated
player channel:
To cue up the playlist:
• Double-click the first element of the playlist in the Playlist Panel
OR
• Press the RECUE button or on the keyboard
The playlist will then be loaded on the first frame of the first element.
To cue up one element of the playlist:
• double-click it on the Playlist Panel
The corresponding element will then be loaded. The playlist will cue up on the first
frame of that element.
Loading a Playlist Element onto the Control Panel
It is possible to load a playlist element onto the Control Panel. See the
corresponding section in Control Panel chapter in part 5 of the manual.