Important safeguards – Focus Foodservice West Bend Commercial Aluminum Coffeemakers - Use & Care es User Manual

Page 26

Advertising
background image

2

IMPORTANT SAFEGUARDS

To prevent personal injury or property damage, read and follow all instructions and

warnings.

When using electrical appliances, basic safety precautions should always be followed

including the following:

Read all instructions.

Do not use appliance for other than intended use.

Do not place on or near a hot gas or electric burner, or in a heated oven.

Do not operate when the appliance is not working properly or when it has been

damaged in any manner. For service information see warranty page.

The use of accessory attachments not recommended by Focus Products Group

International may result in fire, electric shock or injury to persons.

Do not attempt to repair this appliance yourself.

Do not use this appliance on the stovetop, under a broiler, in the oven, or in the

refrigerator or freezer.

Do not touch hot surfaces. Use handles and knobs where provided. Use hot pads or

oven mitts when handling hot surfaces.

Extreme caution must be used when moving an appliance containing hot oil or other

hot liquids.

Make sure cover, basket and stem are properly assembled before the appliance is

plugged in (see “Instructions for Making Coffee” section). No part of the appliance

should be removed during the brewing cycle as scalding could occur.

Scalding may occur if the lid is removed during the brewing cycle.

To protect against fire, electric shock and injury to persons do not immerse cord, plugs,

or other electric parts in water or other liquids.

Do not operate any appliance with a damaged cord or plug.

Do not use this appliance outdoors.

Be sure switch is turned to “OFF” before plugging the cord into wall outlet. If the appliance

does not have a switch, be sure the appliance contains water or brewed coffee before

plugging in. Do not leave appliance plugged in when it is not being used.

This appliance has a polarized plug (one blade is wider than the other). To reduce the

risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If

the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a

qualified electrician. Do not attempt to modify the plug in any way.

Always unplug from outlet when not in use and before cleaning. Allow to cool before

putting on or taking off parts and before cleaning.

A short power-supply cord is provided to reduce risks resulting from becoming

entangled in or tripping over a longer cord.

Longer extension cords are available, but care must be exercised in their use. While

use of an extension cord is not recommended, if you must use one, ensure that the

marked electrical rating of the extension cord is equal to or greater than that of the

appliance. If the plug is of the grounded type, the extension cord must be a grounding-

type 3-wire cord. To avoid pulling, tripping or entanglement, position the extension cord

so that it does not hang over the edge of the counter, table or other area where it can

be pulled on by children or tripped over.

Do not use an outlet or extension cord if the plug fits loosely or if the outlet or extension

cord feels hot.

Advertising