Helpful coil information, 7 a.m p.m. mst – MSD 6430 6ALN Ignition Control Compatibility list User Manual
Page 2
7 a.m. - 5 p.m. MST
MSD 5/
MSD 6-
7AL-2, 7AL-3 DIGITAL-7
BLASTER
SERIES
SERIES
SERIES
*
The factory coil from any vehicle that has a 12 volt negative ground electrical system and has a ballast resistor or
resistance wiring in the original ignition key wire will work with the MSD.
NOTE: For MSD 8-Series Ignitions use Pro Power Coil, PN 8201, Pro Power HVC, 8251, or Pro Power HVC II, PN 8261.
HELPFUL COIL INFORMATION
A ballast resistor is not necessary with any MSD Series Ignition but can be left in-line if originally equipped.
The MSD Blaster Coils and any other oil-filled, canister style coils should be mounted so that the high voltage coil
tower is pointed upward. Also, mount the coil so the coil wire is as short as possible to keep resistance low.
Use of any coil that is not compatible may damage the MSD and void the warranty.
Caution: Coils that have an internal power transistor are NOT compatible with MSD Ignition Controls. These are gener-
ally found on late model DIS or coil-per-cylinder ignitions. Check with MSD if you have any questions before
installing an MSD Ignition Control.
Ford TFI Coil
YES
YES
YES
NO
Ford OEM 12V Coil*
YES
YES
YES
NO
GM Transistor
NO
NO
NO
NO
GM HEI Coil
NO
YES
YES
NO
GM OEM 12V Coil
YES
YES
YES
NO
Mallory 28880
NO
NO
YES
NO
Mallory 29212 HEI-Low rpm
YES
YES
YES
NO
Mallory 29213 Ford TFI Low rpm
YES
YES
YES
NO
Mallory 29214
YES
YES
YES
NO
Mallory 29215
YES
YES
YES
NO
Mallory 29216
YES
YES
YES
NO
Mallory 28675
YES
YES
NO
NO
Mallory 28720
YES
YES
NO
NO
Mallory 29150
YES
YES
YES
NO
Mallory 29217
YES
YES
YES
NO
Mallory 29440
NO
YES
YES
NO
Mallory 29620
YES
YES
NO
NO
Mallory 29625
YES
YES
NO
NO
Mallory 29901
NO
NO
YES
NO
Mallory Super Mag 28900
NO
NO
NO
NO
Moroso 72350
YES
YES
YES
NO
Moroso 72380
YES
NO
NO
NO
Moroso 72381
NO
YES
YES
NO
Nology 151991500
NO
NO
NO
NO
Nology 151991600
NO
NO
NO
NO
Nology 15199170
YES
YES
NO
NO
Nology 151991750
YES
YES
NO
NO
Nology 151991800
NO
NO
NO
NO
Pertronix Flame-Thrower 40,000 Volt Canister Coil
YES
YES
YES
NO
Pertronix Flame-Thrower 45,000 Volt Canister Coil
YES
YES
YES
NO
Pertronix Flame-Thrower 50,000 Volt E-Core Coil
NO
YES
YES
NO
Pertronix Flame-Thrower HV 60,000 Volt Coil
NO
NO
NO
NO
Any foreign or domestic 12V Coil*
YES
YES
YES
NO
M S D
• W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
© 2012 Autotronic Controls Corporation
FRM30885
Revised 12/11
Printed in U.S.A.