MSD 8843 Pro-Clamp Separators Installation - Manual

MSD Pro-Clamp Separator Kit
PN 8843
Parts Included:
2 - Four wire assemblies
2 - Three wire assemblies
4 - Two wire assemblies
The top cover of the MSD Separator easily pries off with
a medium size flat screwdriver or even a coin. Each wire
fits securely in the grooves then the cover snaps back into
place.
There is a mounting hole in each Separator so they can be
retained with a screw to a bracket. Note the raised tab on the
base that will keep the Separator straight when bolting it in
place.
MSD Pro-Clamp Separator Kit
PN 8843
Parts Included:
2 - Four wire assemblies
2 - Three wire assemblies
4 - Two wire assemblies
The top cover of the MSD Separator easily pries off with
a medium size flat screwdriver or even a coin. Each wire
fits securely in the grooves then the cover snaps back into
place.
There is a mounting hole in each Separator so they can be
retained with a screw to a bracket. Note the raised tab on the
base that will keep the Separator straight when bolting it in
place.
M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
© 2012 Autotronic Controls Corporation
FRM28453 Revised 12/11 Printed in U.S.A.
M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
© 2012 Autotronic Controls Corporation
FRM28453 Revised 12/11 Printed in U.S.A.