MSD 2922 Fuel Pump Return Kit Installation User Manual

Atomic efi return system

Advertising
background image

M S D

•   W W W . A T O M I C E F I . C O M   •   ( 9 1 5 )   8 5 7 - 5 2 0 0   •   F A X   ( 9 1 5 )   8 5 7 - 3 3 4 4

ONLINE PRODUCT REGISTRATION: Register your MSD product online. Registering your product

will help if there is ever a warranty issue with your product and helps the MSD R&D team create

new products that you ask for! Go to www.msdperformance.com/registration.

CAPABILITIES

The Atomic Adjustable Regulator is configured for a single -6AN inlet, and dual -6AN outlets (for

regulator-to-tank line routing flexibility). The recommended operating range is 0-90 psig (pounds

per square inch gauge). The maximum recommended flow rate is 500 liters/hour (2.2 GPM). The

vacuum/boost compensation ratio is 1:1.

RECOMMENDED PLUMBING SCHEMATICS

Use the schematic below as a guide when installing the kit in conjunction with an Atomic throttle body

EFI system. There are two possible connection points on the throttle body unit, one of which will be

the fuel supply in an operational system. DO NOT “tee” into the supply line and leave the -6AN port

plug installed in the remaining throttle body port. Remove the -6AN port plug from the throttle body

and route fuel from that port to the regulator inlet port (using the supplied hose and fittings). The

hose length between the throttle body and regulator is not critical, but generally speaking, should be

kept to a minimum. Route and secure the hose as necessary to prevent chafing, stretching due to

engine movement, and heat-related damage.

Atomic EFI Return System

PN 2922

Thank you for selecting the Atomic Fuel Line Return kit. This kit is recommended for use with the

Atomic Throttle Body EFI and Atomic LS EFI systems.

1 - Regulator Parts Bag includes:

1 - Regulator Mounting Bracket

1 - Brass Hose Barb Fitting

1 - Stainless Steel Pipe Plug

2 - 10-32 x 0.375 Button Head Cap Screws

1 - High Pressure Fuel Hose Clamp

Parts Included:

1 - Adjustable Regulator

1 - -6AN Port Plug

3 - -6AN Straight Port Fittings

2 - -6AN 90° Push-Lock Fittings

2 - -6AN Straight Push-Lock Fittings

15 Feet - High Pressure Fuel Hose

FUEL

FILTER

FUEL TANK

FUEL

PUMP

AFTERMARKET

ADJUSTABLE

REGULATOR

FUEL

FILTER

FUEL TANK

FUEL

PUMP

MSD ADJUSTABLE

REGULATOR

CORRECT FOR RETURN STYLE FUEL SYSTEM.

Figure 1 Atomic TBI Return Fuel System.

Advertising