MSD 39849 Wire Set, GM 2001, Truck, 8.1L w_HG Installation - Manual

Wire Set Super Conductor
GM 2001-2005 Truck 8.1L V8 w/Heat Guard
PN 39849 (Red) and PN 39843 (Black)
MSD IGNITION • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 857-5200 • FAX (915) 857-3344
© 2005 Autotronic Controls Corporation
FRM27161 Created 12/05 Printed In U.S.A.
Note: To achieve the correct fit it’s recommended that the Multi-Angle boot be bent to
45° as shown in Figure 1.
Note: You will also notice that there are two wires that measure 13” and also six wires
which measure 15”. The two shorter wires are intended to be used on cylinders
#5 and #7 (Driver’s rear two cylinders).
8.5MM RED OR BLACK SPARK PLUG WIRE
MULTI-ANGLE BOOT
45° BEND
SPARK PLUG WIRE
LS1 COIL BOOT
Figure 1
Wire Set Super Conductor
GM 2001-2005 Truck 8.1L V8 w/Heat Guard
PN 39849 (Red) and PN 39843 (Black)
MSD IGNITION • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 857-5200 • FAX (915) 857-3344
© 2005 Autotronic Controls Corporation
FRM27161 Created 12/05 Printed In U.S.A.
Note: To achieve the correct fit it’s recommended that the Multi-Angle boot be bent to
45° as shown in Figure 1.
Note: You will also notice that there are two wires that measure 13” and also six wires
which measure 15”. The two shorter wires are intended to be used on cylinders
#5 and #7 (Driver’s rear two cylinders).
8.5MM RED OR BLACK SPARK PLUG WIRE
MULTI-ANGLE BOOT
45° BEND
SPARK PLUG WIRE
LS1 COIL BOOT
Figure 1