MSD 8501 Ultimate HEI Kit Installation User Manual
Page 2
Advertising
2
INSTALLATION INSTRUCTIONS
M S D
• W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
Figure 3 The Coil, Rotor Bushing and Insulator.
Figure 4 Installing the Coil's Wiring.
4. Install the cap and coil assembly (Figure 4).
5. Install the spark plug wires to their respective
cap terminals, then install the MSD Dust Cover
and its three retaining screws.
6. Connect the HEI Module harness to the
Distributor Cap. See the Tachometer Wiring
section before connecting your tachometer
(Figure 5).
7. Connect a 14-gauge (minimum gauge) wire to
the "BAT" terminal of the cap to supply the 12
volts to the HEI system (Figure 5).
Advertising