MSD 8227 Ford TFI Coil, Hi Performance Installation User Manual
Msd blaster tfi coil
IMPORTANT: Read instructions before attempting the installation.
Parts Included:
1 - Blaster TFI Coil
WARNING: During installation, disconnect the battery cables. When disconnecting the battery,
always remove the Negative cable first and install it last.
The MSD Blaster TFI Coil is designed to produce increased voltage and energy over the stock
Ford TFI Coil. To get even more ignition performance, install an MSD Ignition Control with a PN
8874 Harness for a direct plug-in installation.
1. Disconnect the stock coil connector and the spark plug wire.
2. Remove the four mounting bolts and remove the coil.
3. Install the MSD Blaster TFI Coil.
4. Plug in the wiring harness and connect the coil wire.
Figure 1 Installing the MSD Blaster TFI Coil.
M S D I G N I T I O N
• w w w . m s d i g n i t i o n . c o m • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • FA X ( 9 1 5 ) 8 5 7 - 3 3 4 4
1 - Parts Bag
ONLINE PRODUCT REGISTRATION: Register your MSD product online and you’ll be entered
in our monthly 8.5mm Super Conductor Spark Plug Wire give-away! Registering your product
will help if there is ever a warranty issue with your product and helps the MSD R&D team create
new products that you ask for! Go to www.msdignition.com/registration.
MSD Blaster TFI Coil
PN 8227