MSD 84211 Rotor Phasing Kit for MSD Distributors Installation - Manual (Page 2)

INSERT SCREWDRIVER
AND ROTATE TO ADJUST
PHASING
1 0 INCREMENTS
Figure 4 Adjusting the Rotor.
DOME MUST
FACE UP
5/16” SCREW
CLOCKING
TABS
POSITION ON
BASE AND
ROTATE INTO
POSITION
Figure 3 Top Rotor.
Install the top of the rotor by aligning the tabs and rotating the
top into position (Figure 3). Use the 5/16" screw with washer
to hold in position. It is recommended to position the rotor in
the middle position and adjust from this point.
ADJUSTMENTS
The PN 84211 Rotor provides 40° (+/- 20°) of adjustment.
Adjustments are easy by loosening the rotor screw and using
a flatblade screwdriver to clock to rotor top. See the supplied
tech brief for details on setting rotor phasing.
Limited Warranty
M
SD warrants this product to be free from defects in material and workmanship under its intended normal use*,
when properly installed and purchased from an authorized MSD dealer, for a period of one year from the date of
the original purchase. This warranty is void for any products purchased through auction websites. If found to be
defective as mentioned above, it will be repaired or replaced at the option of MSD. Any item that is covered under
this warranty will be returned free of charge using Ground shipping methods.
This shall constitute the sole remedy of the purchaser and the sole liability of MSD. To the extent permitted by
law, the foregoing is exclusive and in lieu of all other warranties or representation whether expressed or implied,
including any implied warranty of merchantability or fitness. In no event shall MSD or its suppliers be liable for special
or consequential damages.
*Intended normal use means that this item is being used as was originally intended and for the original application
as sold by MSD. Any modifications to this item or if it is used on an application other than what MSD markets the
product, the warranty will be void. It is the sole responsibility of the customer to determine that this item will work for
the application they are intending. MSD will accept no liability for custom applications.
Service
In case of malfunction, this MSD component will be repaired free of charge according to the terms of the warranty.
When returning MSD components for warranty service, Proof of Purchase must be supplied for verification. After
the warranty period has expired, repair service is based on a minimum and maximum fee.
All returns must have a Return Material Authorization (RMA) number issued to them before
being returned. To obtain an RMA number please contact MSD Customer Service at 1 (888) MSD-7859 or visit
our website at www.msdperformance.com/rma to automatically obtain a number and shipping information.
When returning the unit for repair, leave all wires at the length in which you have them installed. Be sure to include
a detailed account of any problems experienced, and what components and accessories are installed on the vehicle.
The repaired unit will be returned as soon as possible using Ground shipping methods (ground shipping is covered
by warranty). For more information, call MSD at (915) 855-7123. MSD technicians are available from 7:00 a.m. to
5:00 p.m. Monday - Friday (mountain time).
M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
© 2012 Autotronic Controls Corporation
FRM29051 Revised 01/12 Printed in U.S.A.