MSD 8230 Single Tower, Isolated Ground Coil Installation - Manual

MSD Single Tower Coil with Isolated Ground
PN 8230
Figure 2 Dual Coil System to DIS-2 Ignition.
Figure 1 Grounding the Coil.
M S D
• W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
ONLINE PRODUCT REGISTRATION: Register your MSD product online and you’ll be entered
in our monthly 8.5mm Super Conductor Spark Plug Wire give-away! Registering your product
will help if there is ever a warranty issue with your product and helps the MSD R&D team create
new products that you ask for! Go to www.msdperformance.com/registration.
Parts Included:
1 – Coil
2 – Perma-Seal Butt Connectors
2 – Perma-Seal Ring Lung Terminals
1 – 24" Black Wire
The MSD Single Tower Coil can be used in several applications
with MSD's DIS Ignition Controls. The following diagrams
(Figures 2 and 3) show the wiring of the PN 8230 Coil when
used in different applications with MSD’s DIS Ignition Controls.
Note: The coil must always be grounded to the engine block
using the right side mounting hole and the supplied
Black wire (Figure 1).