MSD 7730 Power Grid System - Controller Only - Manual

M S D I G N I T I O N • W W W . M S D I G N I T I O N . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • FA X ( 9 1 5 ) 8 5 7 - 3 3 4 4
Using a Racepak V-Net Data Recorder with the
MSD Power Grid Controller, PN 7730
STOP
Before connecting your Power Grid to a Racepak V-Net data recorder, ensure the below instructions are followed, in
exact order. Failure to do so will result in lack of communication between the Power Grid and Racepak data recorder.
DATA LOGGER COMPATIBILITY
The MSD Power Grid is currently compatible with the following Racepak V-Net data recorders: V300, V300SD, V500,
IQ3 Logger Dash, and G2X Pro.
When utilizing a V300 or V500, the data recorder must have the latest firmware installed before connection with the
Power Grid. Contact the Racepak factory for assistance in determining the firmware level in your V300 or V500.
Software: Your PC must be running Racepak DatalinkII, version 3.8.0 or higher. To determine software
version, select HELP / About DatalinkII in the main menu of the DatalinkII software. The latest version
software may be downloaded at www.racepak.com/downloads.
Connection: Your MSD Power Grid connects to the Racepak data recorder using a standard Racepak
V-Net “T” cable. V-Net T cables are available in 9”, 18” and 36” lengths and may be obtained from
Racepak.