MSD 5526 GM Dual Connector Coil, Street Fire Installation - Manual

IMPORTANT: Read instructions before attempting the installation.
Parts Included:
1 - Street Fire GM Dual Connector Coil
WARNING: During installation, disconnect the battery cables. When disconnecting
the battery, always remove the Negative cable first and install it last .
The Street Fire GM Dual Connector Coil is designed to produce increased voltage
and energy over the stock GM Coil. To improve your vehicle’s ignition, try a set of
Street Fire Spark Plug wires!
1. Disconnect the stock coil connectors and the spark plug wire.
2. Remove the factory coil. It may be necessary to remove the factory coil bracket to
drill the rivets out to remove the stock coil.
3. Install the Street Fire GM Coil and mount it with the supplied hardware.
4. Plug in the wiring connectors and the coil wire.
Figure 1 Installing the
Street Fire GM Dual
Connector Coil.
S T R E E T F I R E
• W W W . S T R E E T - F I R E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
1 - Parts Bag
ONLINE PRODUCT REGISTRATION: Register your MSD product online and you’ll be
entered in our monthly 8.5mm Super Conductor Spark Plug Wire give-away! Registering
your product will help if there is ever a warranty issue with your product and helps the MSD
R&D team create new products that you ask for! Go to www.msdignition.com/registration.
Street Fire Blaster GM Dual Connector Coil
PN 5526