MSD 5527 Ford TFI Coil, Street Fire Installation - Manual

IMPORTANT: Read instructions before attempting the installation.
Parts Included:
1 - Street Fire TFI Coil
WARNING: During installation, disconnect the battery cables. When disconnecting
the battery, always remove the Negative cable first and install it last .
The Street Fire TFI Coil is designed to produce increased voltage and energy over
the stock Ford TFI Coil. To improve your vehicle’s ignition, try a set of Street Fire
Spark Plug wires!
1. Disconnect the stock coil connectors and the spark plug wire.
2. Remove the four mounting bolts and remove the coil.
3. Install the Street Fire TFI Coil.
4. Plug in the wiring harness and connect the coil wire.
Figure 1 Installing the
Street Fire TFI Coil.
ONLINE PRODUCT REGISTRATION: Register your MSD product online and you’ll be
entered in our monthly 8.5mm Super Conductor Spark Plug Wire give-away! Registering
your product will help if there is ever a warranty issue with your product and helps the MSD
R&D team create new products that you ask for! Go to www.msdignition.com/registration.
Street Fire Blaster TFI Coil
PN 5527
1 - Parts Bag
S T R E E T F I R E
• W W W . S T R E E T - F I R E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4