Ohaus GraviTek Titration Scale - Manual (Page 13)

GraviTek™ Titration Scale EN-11
printing. Pressing the Print button again will restart the
printing. The display shows [Prt.on] and {Prt.oFF]
each time the Print button is pressed.
Print Coefficients [Pr.CoEF]: Press Yes to print a list of all internal coefficients.
Print Memory [CPrt.mME]:
Press Yes to print out all stored test data in
memory.
4.2.4 USB Menu
The USB menu is only available only when the USB option is installed. The USB
menu contains the following sub-menus:
USB On-Off [On-OFF]: USB
On-Off settings: Off On
Setting to [OFF] will disable the USB interface. Battery
power is conserved while in the [OFF] setting
Baud Rate [bAUd]:
Baud rate settings: 600 1200 2400 4800 9600
19200
Allows selection of a baud rate to match the receiving
device.
Bits & Parity [PArity]: Bits & parity settings: 7-nonE 8-nonE 7-EuEn 7-
odd
Allows selection of bits and parity to match the receiving
device.
Handshaking [HAndSh]: Handshake
settings: nonE On-Off rtS.ctS
Allows selection of a handshaking format to match the
receiving device.
[On-Off] Xon/Xoff software handshaking is used.
[rtS.ctS] RTS/CTS hardware handshaking is used.
5. OTHER FEATURES