Ohaus GraviTek Titration Scale - Manual (Page 5)

GraviTek™ Titration Scale EN-3
2.3. Transportation Lock, Calibration Lock & Pan Installation
Before using the scale the Transportation Lock must be released. At the bottom of the
scale slide the locking pin to the position. See Figures 2-2.
If the scale is to be calibrated by the user ensure that the Calibration Lock is set to
position. See Figure 2-3.
Install the metal pan over the plastic sub-platform.
Figure 2-2. Release Transportation
Lock Figure 2-3. Release Calibration Lock
2.4 Connect Power
A Power Adapter may be used to power the scale. Connect the Power Adapter to an
AC power outlet (see Figure 2-4) and insert the power plug at the back of the scale
(see Figure 2-5)
Figures 2-4, Power Adapter Figure 2-5, Power Plug
For use only with UL or CSA
Certified (or equivalent approved)
power adapter, which is a Class 2 or a
Limited Power Source device.