Ohaus GraviTek Titration Scale - Manual (Page 4)

GraviTek™ Titration Scale EN-2
Button Name Function
• Primary function (Short Press) – When in the Test Mode
Accepts the displayed value for input. Accept
Menu • Secondary function (Long Press) – Enters the User
Menu.
• Primary function (Short Press) – Send the current
display value to serial port if installed Print
Cal • Secondary function (Long Press) – Starts a Span
calibration
• Primary function (Short Press)– Advances to next
available Test Type or Weighing Mode
• Secondary function (Long Press) – Scrolls through the
available Test Types and Weighing Modes.
Mode
Test
No
• Menu function – (No) This key is used to reject the
displayed setting and advance to next available setting
2. INSTALLATION
2.1 Package Contents
• Scale
• Pan
• Draft
Shield
• Calibration Weight
• Power Adapter
• 4
Alkaline Batteries
• USB Module
• USB Driver Mini-CD
2.2. Location
Use the scale on a firm, steady surface. Avoid locations with excessive air currents,
vibrations, heat sources, or rapid temperature changes. Adjust the leveling feet so the
bubble is centered within the smaller circle. See Figure 2.1.
Level Bubble
Figure 2-1, Leveling Adjustments