QNAP Security VioStor NVR (Version: 4.1.2) User Manual
Page 167
167
Note:
All the settings will not take effect until ‘Apply’ is clicked. When applying the changes,
the recording operation will stop for a while (maximum 1 minute) and then restart.
Click ‘Search’ to search for the IP cameras on the local network. Select a channel for
the IP camera and click ‘Add’ to add the camera. By using the search function, the
camera model and the IP address are filled in automatically. Click ‘Close’ to close the
search results.
Add generic IP camera support by the CGI command
The NVR provides an interface for the users to enter the JPEG CGI command of the IP
cameras in order to receive the video and audio streaming data from the IP cameras and
monitor, record, and playback the video of the IP cameras on the NVR.
Follow the steps below to configure the IP camera.
1.
Select the IP camera number.
2.
Select ‘Generic Model’ for the camera brand.
3.
Select ‘Generic JPEG’ for the camera model.
4.
Enter the CGI path of the IP camera in the ‘HTTP URL’ field.
5.
Enter the camera name or the IP address of the camera.
6.
Enter the user name and the password of the IP camera.
7.
Select to enable the recording or not.
8.
Click ‘Apply’ to save the settings.