QNAP Security VioStor NVR (Version: 4.1.2) - Manual (Page 92)

92
8. After configuring the auto cruising settings, select the option ‘Enable auto cruising’ and
click ‘OK’. The NVR will start auto cruising according to the settings.
Note:
The default staying time (interval) of the preset position is 5 seconds. Enter 5–999
seconds for this setting.
The system supports up to 10 preset positions (the first 10) configured on the PTZ
cameras. Up to 20 settings for auto cruising can be configured. In other words, the
NVR supports maximum 10 selections on the drop-down menu and 20 settings on the
auto cruising list.