QNAP Security VioStor NVR (Version: 4.1.2) - Manual (Page 61)

61
Options
To configure advanced monitor settings, click .
The following options are provided under the ‘General’ tab.
Event Notification:
When ‘Enable alert for all surveillance events’ option is enabled and a surveillance
event is triggered, the alert icon will be shown on the monitoring page
instantly. Click the icon to view the alert details.
After enabling ‘Issue notification when the disk reaches maximum operation time
set below’ in System Tools -> Hard Disk SMART (refer to chapter 6.7.8), you can
then ‘Enable alert for disk error and warning’ to receive alarm notifications when
hard drive events occur.
Display Order: Click ‘Reset’ to reprioritize the monitoring channels to default order.