QNAP Security VioStor NVR (Version: 4.1.2) - Manual (Page 237)

237
e. If the NVR is not found, click ‘Refresh’ on the Finder to try again.
f. If the problem persists, contact the technical support.
10. The changes to the system configuration did not take effect.
After changing the settings on the administration page, click ‘Apply’ to apply the
changes.
11. The monitoring page cannot be fully displayed in Internet Explorer.
When using the zooming function of Internet Explorer, the page may not be displayed
properly. Please click F5 to refresh the page.
12. I cannot use the SMB, FTP, and Web File Manager services of the NVR.
a. Login the NVR as an administrator. Go to ‘Network Settings’ > ‘File Services’ and
check if these three functions are enabled.
b. If the NVR is installed behind a router, the SMB and FTP services can only be
accessed from the same subnet. Please refer to Appendix B for details.
13. The NVR takes too long to restart.
When the NVR takes more than 5 minutes to restart, turn off the power and turn on the
server again. If the problem persists, please contact the technical support.