QNAP Security VioStor NVR (Version: 4.1.1) - Manual (Page 182)

182
6.6.4 Alarm Settings
The NVR provides ‘Traditional Mode’ and ‘Advanced Mode’ for alarm settings. Select
‘Traditional Mode’ to use the standard alarm settings in response to the alarm events. To
use advanced event management, select ‘Advanced Mode’.
Traditional Mode
Select a channel (IP camera/video server) on the list and configure the alarm settings.
The video recording will be activated when the alarm input of the selected channel is
triggered or a moving object is detected.
When the option ‘Activate alarm recording only on selected schedule’ is enabled, the alarm
recording will be activated only when the alarm input is triggered or a moving object is
detected within the schedule. Test the settings by clicking ‘Test’. Click ‘Apply’ to apply
the settings to the selected channel. To apply the same settings to all the channels on the
list, click ‘Apply to all cameras’.