QNAP Security VioStor NVR (Version: 4.1.1) - Manual (Page 94)

94
4.3.1 Icons and Description
Icon Description
Enable E-map edit mode.
E-map edit mode in use. Click this icon to disable the edit mode.
Add a map.
Edit the name of a map.
Remove a map or a camera icon.
Event alert not in use. Click this icon to enable event alert on the
E-map.
Event alert in use. When an event occurs to an IP camera, such
as a moving object is detected, the camera icon will change and
flash to alert the administrator. To disable event alert on the
E-map, click this icon.
Note: When event alert is enabled, the E-map cannot be edited.
The icon will become invisible.
Icon for a set of E-maps.
Icon for a single E-map.
Icon for a PTZ IP camera.
Icon for a fixed body or fixed dome IP camera. After dragging the
icon to a map, right click the camera icon to change the icon
direction or delete the icon from the E-map.