QNAP Security VioStor NVR (Version: 4.1.1) - Manual (Page 35)

35
2.6 System Configuration
Install Finder
1. Run the product CD, the following menu is shown. Click ‘Install Finder’.
2. Follow the instructions to install the Finder. Upon successful installation, run the
Finder. If the Finder is blocked by the firewall, unblock it.
3. The Finder detects the NVR servers on the local network. If the server has not been
initialized, you will be prompted to perform quick setup. Click ‘Yes’ to continue.
Note: If the NVR is not found, click ‘Refresh’ to try again.