Spicer Tandem Drive Axles Service Manual D__R440, 460, 480, D_R461, 462, 463, 521, 581, 601, 651, 652, 653 - Manual (Page 45)

41
Power Divider
Power Divider
Note: Lifting mechanism may create nicks and burrs on input
yoke. Remove if present.
7. If removed, install dowel pins in carrier. Install power
divider cover capscrews and lock washers placing
sockethead capscrew at location shown on drawing.
Torque capscrews to appropriate specification. (See
Torque Chart on page 107).
Note: For power dividers equipped with an input shaft tapered
roller bearing, adjust shaft end play after power divider
cover is assembled to differential carrier. Refer to page
43.
1 - Socket head capscrew
2 - Dowel pin
2
2
1