Warranty, Extended protection plan registration form, Driveline lubricants – Spicer Dana Commercial Vehicle Warranty User Manual
Page 32: Steering shaft lubricants
Lubrication
Driveline Lubricants
For assistance identifying the driveshaft model, see DSMT0100.
* Spicer Life XL
®
universal joints are best identified by the rubber seal guards (a soft, pliable “boot”) fitted to the bearing cups.
Spicer Life XL universal joints have a plastic zerk cover attached prior to the required initial 350,000 mile re-lubrication. Standard
Spicer Life Series
®
universal joints have a hard plastic slinger fitted to the bearing cups.
** Dana recommends re-lubrication of Spicer driveshaft with grease meeting NLGI Grade 2 specifications with an operating
range of +325ºF/+163ºC to -10ºF/-23ºC. The grease must also be compatible with commonly used seal materials (e.g. Nitrile -
'Buna N' types) and commonly used multipurpose greases (e.g. Lithium stearate types).
*** After initial miles (km) or time is reached, the plastic grease zerk cover must be removed and the joints re-lubricated. Once
the grease zerk cover has been removed, the “Re-Lubrication Cycle” interval must be followed.
Steering Shaft Lubricants
Product
Service Interval for Line Haul
Service Interval for Vocational
10-Series
(1480 thru 1810 & SPL90)
Note: Slip member also requires lubrication.
10,000/15,000 miles
[16,000/24,000 Km] or 3 mos.
(which ever comes first)
5,000/8,000 miles
[8,000/12,800 Km] or 3 mos.
(which ever comes first)
Spicer Life Series
®
(SPL55, 70, & 100)
Booted and permanently lubricated slip member.
25,000 miles
[40,000 Km] or 6 mos.
(which ever comes first)
25,000 miles
[40,000 Km] or 6 mos.
(which ever comes first)
Spicer Life Series
®
(SPL140, 170, & 250)
Std. Spicer Life Series U-Joint. Booted and
permanently lubricated slip member.
100,000 miles
[160,000 Km] or 6 mos.
(which ever comes first)
25,000 miles
[40,000 Km] or 6 mos.
(which ever comes first)
Spicer Life XL
®
*
(SPL170XL & 250XL)
FIRST LUBRICATION CYCLE**
Extended lubrication U-Joint.
Booted and permanently lubricated slip member.***
350,000 miles
[560,000 Km] or 3 yrs.
(which ever comes first)
100,000 miles
[160,000 Km] or 1 year
(which ever comes first)
Spicer Life XL
®
*
(SPL170XL & 250XL)
RE-LUBRICATION CYCLE**
Extended lubrication U-Joint.
Booted and permanently lubricated slip member.***
100,000 miles
[160,000 Km] or 6 mos.
(which ever comes first)
25,000 miles
[40,000 Km] or 6 mos.
(which ever comes first)
Series
Service Interval for Line Haul
Service Interval for Vocational
SPL
®
6
(Aluminum with greaseable u-joints and perma-
nently lubricated slip member design)
50,000 miles
[80,000 Km] or 6 mos.
(which ever comes first)
25,000 miles
[40,000 Km] or 3 mos.
(which ever comes first)
1000
(Steel with greaseable universal joints)
Note: Slip member requires the same lubrication
intervals)
50,000 miles
[80,000 Km] or 6 mos.
(which ever comes first)
25,000 miles
[40,000 Km] or 3 mos.
(which ever comes first)
July 2012, Rev. 1
27