TROY Group MICR_IRD 9000 1UP MICR Printing Solutions User’s Guide - Manual (Page 84)

Section 4 Using the TROY Printer Utility
MICR Solutions User’s Guide -- Document #50-70341-001 Rev. F
4-37
Verifying the
PCL 5
Connection
(cont.) T O PRINT THE PCL MICR DEMONSTRATION PAGE :
NOTE: MICR Secure, MICR Secure EX, and IRD 9000 Secure EX series printers must
have the printer keylock switch set to “Print MICR” to enable printing of the PCL MICR
Demonstration page.
NOTE: TROY IRD 9000 1
UP series printers must have the 100-sheet multipurpose tray
installed to use standard-size forms for printing test and demonstration pages.
1. From the Main Window, click on the printer you wish to access.
2. Type in the current administrator password in the password box at the bottom of the Main Window. If a
password is not set, then leave the password box blank.
3. From the Main Window, click on File, Print, and then click on PCL MICR Demo. The printer will
automatically print the PCL MICR demonstration page (see the example on the next page).