Velleman VM151 - Manual (Page 5)

5
TRANSMITTER INSTRUCTIONS
Transmitter instructions
The transmitter comes with a factory set default code.
1. Hold SW1 (left button).
2. Briefly press the 'program'-button (SW3) 3 times. The LED will flash 3 times.
3. Release
SW1.
4. Your unique 32-bit code has been generated and stored.
1. Hold SW1 (left button).
2. Hold the 'program'-button (SW3). After +/- 10s the led will flash 5 times.
3. Release
both buttons.
4. Your code has been erased.
Open the enclosure :
Changing the code :
Return to the default code :
open
SW3
SW1
SW2
LED
HVM151G'1_rev2.pub
page 5
Composite
Wednesday, April 15, 2009 11:08