Veris Industries E3X Commissioning Guide - Manual (Page 11)

PAGE 11 ©2011 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 03112
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
TM
COMMISSIONING GUIDE E3x
9. Branch CT Phase.
Use this tab to set the phase per channel. The standard product default setting is an “A, B, C” phase rotation. The default setting for the Y60 single-phase/split-phase
version of the product is “A, B, A, B.”
Global Resets Button
This section is used to reset data values. Resets are for each individual panel. WARNING: Data will be deleted and counters will return to a value of zero.