Veris Industries H8822 Install - Manual (Page 3)

VERIS INDUSTRIES
™
H8822
INSTALLATION GUIDE
ZL0056-0C PAGE 3 ©2010 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 06101
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
installation checklist
1. Inspect components
Required hardware
AcquiSuite DR™ H8822-1 server (required) •
Data connection (ethernet or phone line). •
Ethernet Cat 5 standard or crossover cable (required for LAN or direct •
laptop-to-AcquiSuite DR connection); or
Phone line and cord (required for modem connection)
•
Optional hardware
Analog sensors for temperature, humidity, etc. •
Pulse output transducers for measuring gas, electricity, water, etc. from •
existing meters and sensors.
Additional Modbus RTU devices power meters (e.g., Veris Enercept, PML
•
Ion, etc)
2. Choose a connection method
For LAN installations only:
Ethernet 10/100Mbit connection point (hub or switch) •
IP address and Netmask (check with system administrator) •
Gateway address (check with system administrator) •
DNS server address (check with system administrator) •
HTTP Proxy address (optional), may be required if the AcquiSuite DR is •
behind a firewall (check with system administrator)
For dialout installations only (AcquiSuite DR initiates a phone call to your ISP or
modem server):
Phone line with dialtone. May be shared with other devices such as a fax •
machine
Phone cord for connection to phone system
•
Dial out access prefixes, and long distance access code if required. (ie, dial •
9 for local line)
ISP account or Modem Server phone number (check with ISP)
•
DNS server address. (check with ISP) •
Time to dial. If phone line is shared, choose a time of day when other •
devices are not in use
A regular telephone for line testing and diagnostics
•
For dialin installations only (AcquiSuite DR receives/answers a phone call from your
computer):
Phone line with dialtone. Must be NOT shared with other devices. (or use •
appropriate line sharing device)
Phone cord for connection to phone system
•
Telephone number for the phone line that the AcquiSuite DR will be •
attached to (so you can call the AcquiSuite DR)
Make note of the AcquiSuite DR dialin IP/Netmask for future use.
•
A regular telephone for line testing and diagnostics •
hardware overview
Processor Arm9 embedded CPU
Operating system Linux
Flash memory 16 MB flash
Memory 32 MB RAM
LED 8x input, 4 modem activity, Modbus TX/RX, ppower,
system, io status
Console 2 x 16 LCD (passive), two pushbuttons
LAN RJ45 10/100 Ethernet, full half duplex
Modem V.34 bis, 33,600 bps
Protocols Modbus/RTU, Modbus/TCP, TCP/IP, PPP, HTTP/HTML, FTP,
NTP, XML
Power requirements 120-240 VAC
Power supply Included, 24 VDC, Class 2 transformer
Interval recording User selectable 1-60 minutes; default 15 minute interval
Serial port RS-485 Modbus, supports up to 32 external devices
(expandable)
Inputs 8x inputs with multiple modes: 0-10V/4-20mA (min/
max/average/instantaneous data); pulse/dry contact
(consumption/rate/runtime/status)
Size 8" x 9.25" x 2.5"