Veris Industries AE012 Install - Manual (Page 4)

ZL0120-0A Page 4 of 5 ©2013 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 08131
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
Installation Guide
Accessories
AE012
TM
Push the bottom of the meter onto the DIN rail until there is an audible click.
If necessary, remove the E5x from the DIN rail using a flat screwdriver to pry out the bottom (black) clip while lifting out the
bottom of the meter.
Lower the four brackets so that the swing panel cover can be attached using the enclosed hardware.
Installation (cont.)