Veris Industries TJ SERIES Install - Manual (Page 2)

Z203571-0J Page 2 of 2 ©2013 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 08131
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
Installation Guide
Temperature
TJ Series
TM
Dimensions
L as ordered
0.3"
(6.3 mm)
Optional 1/4” female quick disconnect
1.5"
(38 mm)
2"
(51 mm)
1.1"
(28 mm)
1"
(26 mm)
Installation 1. Remove adhesive covering from foam gasket.
2. Push probe through hole in gasket until gasket adheres to underside of mounting flange.
3. Drill a 3/8” diameter hole in the duct for the sensor probe.
4. Mount flange to duct using screws provided.
5. Wire as shown.
Black
White
Thermistor
RTD