Veris Industries USB to DIC Converter Install - Manual (Page 10)

SOFTWARE CONFIGURATION
Prior to using the DIC product software, the proper communications (COM) port number must be established
1. Open the Device Manager by selecting the Start button, then type “Run” in the search field, then press the keyboard
Enter key and then type “devmgmt msc” in the “Open” field See Figure 8
Figure 8: Starting the Device Manager from the Run Dialog
2. Click the OK button to open the Device Manager window
The Device Manager screen will appear (Figure 9) The COM port number assigned to the USB serial port is indicated
under the “Ports (COM & LPT)” heading The port assignment shown below is COM16 On other computers, the port
assignment number may be different
Figure 9: Device Manager Port Listings
USB to DIC Converter
Page 10 May 2012