Installation guide, Product diagram, Back front – Veris Industries H8936 Install User Manual
Page 3
Z202662-0G
PAGE 3
©2012 Veris Industries USA 800.354.8556 or 1.503.598.4564 / [email protected]
09126
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
TM
H8932/H8936
INSTALLATION GUIDE
7
10
9
1
4
3
6
12
8
2
5
11
UP
DOWN
SELECT
METER
ALARM
OPERATING MODE
NETWORK DISPLAY
VERIS INDUSTRIES
SETUP
Hawkeye
®
NEXT
PREVIOUS
HOLD
SCROLL
13
14
15
1.
250 VAC 200 mA Fast Blow Fuse:
Fused power connection for circuit
protection.
2.
Lithium Battery:
On board clock back up.
BACK
FRONT
PRODUCT DIAGRAM
CAUTION! DANGER OF EXPLOSION IF BATTERY IS INCOR-
RECTLY REPLACED. REPLACE ONLY WITH THE SAME OR
EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER.
DISPOSE OF USED BATTERIES ACCORDING TO THE MANUFAC-
TURER’S INSTRUCTIONS.
3.
Power Transformer:
Linear power supply for reliability and low noise.
4.
120 VAC Power Supply Terminals:
2-position Euro style pluggable connector
for 120 VAC, 60 Hz line to neutral power connection.
5.
Auxiliary Input Status LED:
Indicates alarm condition for the auxiliary input.
6.
Membrane Switch Pin Connector:
Connection point for push button panel.
7.
Auxiliary Input Contacts:
Contact closure or pull-to-ground (10mA max.)
8.
Upstream RS-232 Input Jack:
Connection point for upstream RS-232 network.
9.
Upstream RS-485 Connection Point:
5-position Euro style pluggable
connector for upstream RS-485 network. 2-wire or 4-wire selectable.
10.
Downstream RS-485 Connection Point:
5-position Euro style pluggable
connector for downstream RS-485 network. 2-wire or 4-wire selectable.
11.
12 VDC Power Port:
Alternate 12 VDC connection point for use with plug-in wall
mount transformer or power supply (auxiliary input is disabled if 12 VDC power is
used).
12.
Membrane Switch Ribbon Cable
13.
Tri-Color LED:
green = normal operation (no networked devices are in warning
or alarm mode); yellow = warning (one or more networked devices are in warning
mode); red = alarm (one or more networked devices are in alarm mode or the
auxiliary input is active).
14.
LCD Display:
Local data display; high resolution LCD with adjustable backlight
15.
Membrane Keypad:
Easy front-panel setup