VTech DS6751_-2-3 Manual - Manual (Page 22)

18
Bluetooth
Add a cell phone
Before you begin, make sure that you have cellular coverage and your Bluetooth
enabled cell phone is not connected to any other Bluetooth devices. Refer to your cell
phone user's manual to learn how to search for or add new Bluetooth devices.
You can pair and connect up to two cell phones to the telephone base. All paired cell
phones are shown on the cell device list. Only one Bluetooth cell phone can be on a
call at a time.
Once you have paired and connected a device with the telephone base, you do not
need to repeat the procedure again unless you have replaced the paired cell phone
with a new one.
To pair and connect a cell phone:
Press 1 / 2 on the telephone base. You hear two beeps and the 1/ 2 device
light blinks.
When slot 1 is empty, the base screen displays
Pairing D1... and the 1 device light blinks.
When slot 1 is paired and slot 2 is empty, the base screen
displays Pairing D2... and the 2 device light blinks.
When both slots are paired, the base screen displays
Replace 1 or 2? Use the dialing key to choose the desired
slot. Then the corresponding light ( 1 or 2) blinks.
Turn on the Bluetooth feature of your cell phone. Once your cell phone finds your
VTech phone ( VTech DS6751), press the appropriate key on your cell phone to
continue the pairing process.
Your cell phone may prompt you to enter the PIN of the telephone base. The default
PIN of the telephone base is 0000.
All cell phones that are connected to the telephone base are
disconnected temporarily until the pairing process is completed.
When the cell phone is successfully paired and connected to the
telephone base, you hear two beeps. The corresponding status
icon ( 1 /
2
) displays. The corresponding device light ( 1/ 2)
turns on.
If you have trouble pairing your cell phone, it may not be compatible with your
DS6751. Check the Bluetooth compatibility list at www.vtechphones.com.
The pairing process may take up to one minute. If the pairing process fails, turn off
the Bluetooth feature on your phone and on the
DS6751 by pressing 1 / 2. Then
repeat the steps above to pair and connect again. In some cases, it may take you a
few attempts to complete the pairing process.
The steps for the pairing process may vary for different cell phones. If this happens,
follow the prompts on your cell phone and your DS6751 to complete the pairing process.
1.
•
•
•
2.
•
•
3.
•
•
HANDSET X
10:01 AM 01/02
ECO
ANS ON
1
2