Intercom, Multiple handset use – VTech DS6751_-2-3 Manual User Manual
Page 45

41
Multiple handset use
Intercom
Use the intercom feature for conversations between two devices. You can buy
additional expansion handsets (
DS6701) for this telephone base. You can register up
to five handsets to the telephone base.
To initiate an intercom call with a handset:
Press
MENU on the handset when not in use.
Press or
to scroll to Intercom, then press SELECT.
If you have only one handset, your handset shows
Calling
base.
If you have two or more handsets, your handset displays
Intercom to. Press 7 for the telephone base or 1-5 for
HANDSET 1 to HANDSET 5. Your handset displays
Calling base or Calling HS X.
The destination device rings and its screen displays
HS X is calling.
3. To answer the intercom call on the destination handset, press
/HOME, /CELL, or any dialing key (0-9, TONE
or
�UIET
#
). Both handsets now display
Intercom
.
- OR -
To answer the intercom call at the telephone base, press
/HOME, /CELL or any dialing key (0-9, TONE or
�UIET
#
). Both devices now display
Intercom
.
4. To end the intercom call on either handset, press
OFF or
place the handset back in the telephone base or charger.
Both handsets display
Intercom ended
.
- OR -
To end the intercom call at the telephone base, press
/HOME or /CELL. Both
devices display
Intercom ended
.
You can cancel the intercom call before it is answered by pressing
CANCEL.
If the destination device does not answer the intercom call within 100 seconds, is
accessing the answering system, on a call or out of range, the originating handset
displays
Unable to call and returns to idle mode.
You can press
OFF or MUTE on the destination handset, or CANCEL or MUTE on the
telephone base to temporarily silence the intercom ringer.
You can use four devices on two pairs of intercom calls. For example, when four
devices are used on two pairs of intercom calls, use the fifth device for an outside call.
If there is an incoming call while the originating handset displays
Calling HS X or
Calling base, the intercom request will be stopped and the screen displays
Incoming call.
1.
2.
•
•
•
•
•
•
•
Calling HS X
ECO
Intercom
ECO
HS X is calling
ECO
10:01
AM
11/20
HS X is calling
MSG #
1