VTech DS6751_-2-3 Manual - Manual (Page 75)

71
Expand your telephone system
Your telephone base can support up to five handsets. Each handset must be
registered to the telephone base before use. The handsets provided within your
product package are already registered as HANDSET 1 and so forth. You can add
new handsets ( DS6701, purchased separately) to your telephone base. Additional
handsets are assigned numbers in the sequential order they are registered (up to
HANDSET 5).
Add and register a handset
When first purchased, each expansion handset displays To register HS... and
...see manual alternately. You may need to charge the handset before registering to
the telephone base. For more details on battery charging, see the table on page 4.
To register a handset:
Place the new/non-registered handset in the telephone base.
2. After about 10 seconds, the handset and telephone base display Registering...
When the registration process completes, the handset and telephone base display
Registered and you hear a confirmation tone. The registration process takes about
60 seconds to complete.
If the registration fails, the handset displays Failed, and then To register HS... and
...see manual alternately. Remove the handset from the telephone base. Then try the
registration process again.
You cannot register a handset if any other system handset is in use.
Only one handset can register to the telephone base at a time.
1.
•
•
Do not place the handset
in the charger.
Appendix