Vutec ARTSCREEN Surface Hook - Installation Instructions - Manual (Page 3)

3. Send the screen up halfway then stop. Send the screen down to its
closed limit. The screen must stop above the desired position. If it
is not, repeat step 2
4. When the Art Screen stopped above the desired closed limit; do
Step 1 to set the desired closed limit.
5. Check and adjust the closed and open limits as necessary.
Figure 6
Complete Art Screen
Figure 5
Motor Limit Switches
VUTEC CORPORATION
www.vutec.com
TEL: (954) 545 9000 - FAX: (954) 545 9011
E-MAIL:
[email protected]