Wiha Tools DuraBit with torsion zone - Manual

112
Wiha DuraBit.
A diamond among bits.
Wiha DuraBit.
• Extremely wear-resistant
hard-metal coating also used
in the aerospace industry
gains a secure hold in the
screw head. Outstanding
reduction of CamOut forces
prevents slipping out of the bit
• Wolfram carbide particles
guarantee a significantly
greater service life when
compared to conventional
diamond-coated bits
• Nickel coating of the
entire bit for extra-long
corrosion resistance
• Clear reduction in the cam-out
effect (slipping of the bit out
of the screw head) for:
– Fatigue-free work
(less force required)
– Less wear of bit and screw
– Safe work on delicate
surfaces
• Work with Wiha DuraBits
featuring torsion zones
reduces the amount of time
for fastening and enables
economic and safe work
Long-lasting, durable wolfram carbide
coating increases service life of the bit
by many times when compared to a
diamond-coated bit. The subjacent nickel
coating ensures extra-long corrosion
resistance.
Non-corroding nickel coating.
Wolfram carbide particles.
The Dura coating reduces CamOut
effects to an unbeatable minimum –
no more slipping out of the bit from
the screw head.
With DuraBit, Wiha puts its innova-
tive strength to the test. The tough
torsion bit has an extremely wear-
resistant hard-metal coating that
gains a secure hold in the screw head.
This revolutionary coating technology
originates from the aerospace
industry and guarantees outstanding
gripping of the bit surface.
The user quickly comes to appreciate
the benefits: a longer tool life,
much reduced cam-out effects and
superior handling enable efficient
work, even with the most difficult of
applications.
The wolfram carbide particles are
permanently applied to the bit tip –
a breaking away of the particles
(as occurs with conventional,
diamond-coated bits) is therefore
significantly reduced.
The extremely wear-resistant
hard-metal coating considerably
increases tool life.