Wiha Tools T-handle - Manual

102
Wiha T-handle.
The classic for high torques.
Wiha T-handle.
• High torque transmission
thanks to ergonomic handle
• Through hardened blades
made of chrome-vanadium
steel withstand every stress
• The angled blade end is
injection-moulded into the
T-handle and non detachable
• Hanging hole for workshop
storage
• Made of high-quality plastic
The handle design is such that
the complete handle surface
can be used, thus enabling
optimum power transmission.
Red handle:
metric hex blades
Yellow handle:
inch hex blades
Green handle:
TORX
® blades
Light green handle:
TORX PLUS
® blades
Thanks to the clear colour-coding system,
you’re sure to select the appropriate blade. A wide range of hex (metric and
inch sizes), TORX
® and TORX PLUS ®
blades, as well as hex drivers
(metric and inch), ensures that
the perfect tool is at hand for all
conceivable applications.
A colour-coding system for the
handles facilitates the selection
of the right blade.
The ergonomic design of the Wiha
T-handle that fits comfortably into
the hand ensures optimum,
symmetrical torque transmission
from the hand through the blade to
the screw. The extruded, angled end
of the blade ensures that, even at the
highest torques, the blade does not
slip but gains a secure hold when
either tightening or loosening the
screw. As the blades are subjected to
high stresses, Wiha uses exclusively
high-quality chrome-vanadium steels
that are first subjected to a complex
hardening procedure before being
used in the wearresistant blades.