Wiha Tools Flag and key handle - Manual

107
www.wiha.com
Wiha flag and key handle.
The knack of applying just the right amount of pressure.
Wiha flag and key handle.
• Large support areas for thumb
and index finger on the
ergonomically shaped handles.
The transmission of high
torques is thus quite simple
• Cylindrical handle shaft for
quick turning of screws
• Innovative torsion blade
for T5 to T10 greatly reduces
the risk of breakage. Thus,
broken profiles in the screw
head are largely avoided.
If more torque than required is
applied, the blade responds
elastically (cf. picture)
• Thanks to thin blades,
even covered screws in the
screw axis can be turned
The small, 7-piece bench stand ensures
a tidy working environment.
The flag and key handles have large
support surfaces for thumb and index
finger for ease of use and efficiency.
Screwdrivers with flag or key handles
are used whenever replacing
indexable inserts on milling heads.
Thanks to the large support area for
thumb and index finger, it is possible
to loosen or tighten any screw with
comfort by applying just the right
amount of pressure. These tools
are also particularly suitable for
high-torque adjustment work
Innovative torsion blade
in sizes T5 to T10 does not damage
the expensive fastening screws or
the tool profile.