VEGA VEGASON 54V…56V - Manual (Page 88)

88 VEGASON 54V … 56V
Setup - Adjustment with the PC on VEGALOG
As parameter you can choose "dimensionless
(plain numbers), volume, mass, height and
distance“ and assign an appropriate measur-
ing unit (e.g. l, hl). The sensor display then
shows the measured value in the selected
parameter and unit.
• Save the adjustments in the menu " Scaling“
by clicking
"OK“.
The adjustments are now transferred to the
sensor and you are again in the menu win-
dow "
Conditioning“.
• Click in the menu window „ Conditioning“ to
„
Quit“.
• Click in the menu window „ Instrument data
parameter adjustment“ to „
Quit“.
Outputs
• Choose in the main menu window „
Instru-
ment data/Parameter adjustment“ and then
the menu item „
Outputs“.
• Click in the menu window „ Outputs“ to
„
Current output“, to adjust the signal condi-
tion of the 0/4…20 mA output signal.
• If you have made adjustments in the menu
window „ Current output“, click to „
Save“.
• If you want to keep the adjustments un-
changed, click to „
Quit“.