VEGA VEGADIF 65 Profibus PA - Manual (Page 51)

51
6 Adjustment with the display and adjustment module PLICSCOM
VEGADIF 65 • Profibus PA
36129-EN-130417
•
Linearization curve
•
Leak flow volume suppression
•
Sensor-TAG
•
Displayed value
•
Scaling unit (Out-Scale unit)
•
Positions after the decimal point (scaled)
•
Scaling PA/Out-Scale 4 values
•
Unit of measurement
•
Language
The following safety-relevant data are not read out or written:
•
Sensor address
•
PIN
Copy sensor data
Copy sensor data?
Basic adjustment
The reset "Basic adjustment" resets the following menu items to the
reset values (see chart):
Menu section Menu item Reset value
Basic settings Zero/Min. adjustment Measuring range begin
Span/Max. adjustment Measuring range end
Density 1 kg/l
Density unit kg/l
Damping 1 s
Linearization Linear
Sensor-TAG Sensor
Display Displayed value PA-Out
Diagnostics Totalizer 0.0000 10 00 gal
Part sum counter 0.0000 10 00 gal
Service Additional PA value Secondary Value 1
Out-Scale-Unit Volume/l
Scaling 0.00 to 100.0
Decimal point indication 8888.8
The values of the following menu items are not reset with "Reset:
Menu section Menu item Reset value
Basic settings Unit of measurement bar
Temperature unit °C
Position correction No reset
Display Backlight No reset
Reset