23 zener barriers - operating instructions, Application examples, Hazardous area safe area – VEGA Z728 Zener barriers User Manual
Page 23
23
Zener barriers - operating instructions
Application examples
Subject to reasonable modifications due to technical advances.
Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
Da
te of issu
e
05/2
3
/03
Audible alarms
Audible alarms operate at relatively high voltages and low
currents. They are approved for use with various Zener
barriers. The simplest solution is the circuit shown above.
I/P converters
The simplest and most cost-effective solution is a single-
channel Zener barrier. The nominal supply control voltage
must either be ground-free or connected to the negative output
to earth. In theory, the field circuit can have a resistance of
900 Ohm if the voltage supply is 27 V. In practice, however, the
voltage values are lower, so that the field circuit normally has a
resistance of 300 Ohm.
Hazardous area
Safe area
Z728
x3
CL
1
2
8
7
Hazardous area
Safe area
P
I
1
2
3
4
Z787
x3
x3
8
7
6
5